Short Lead Time for Mri Iv Pump - ZNB-XD Infusion Pump – KellyMed
Short Lead Time for Mri Iv Pump - ZNB-XD Infusion Pump – KellyMed Detail:
FAQ
Q: Do you have CE mark for this product?
A: Yes.
Q: Type of infusion pump?
A: Volumetric infusion pump.
Q: Does the pump have pole clamp to be installed on an Infusion Stand?
A: Yes.
Q: Does the pump have alarm of infusion completion?
A: Yes, it is finish or end program alarm.
Q: Does the pump have inbuilt battery?
A: Yes, all of our pumps have inbuilt rechargeable battery.
Specifications
| Model | ZNB-XD |
| Pumping Mechanism | Curvilinear peristaltic |
| IV Set | Compatible with IV sets of any standard |
| Flow Rate | 1-1100 ml/h (in 1 ml/h increments) |
| Purge, Bolus | Purge when pump stops, bolus when pump starts, rate at 700 ml/h |
| Accuracy | ±3% |
| *Inbuilt Thermostat | 30-45℃, adjustable |
| VTBI | 1-9999 ml |
| Infusion Mode | ml/h, drop/min |
| KVO Rate | 4 ml/h |
| Alarms | Occlusion, air-in-line, door open, end program, low battery, end battery,
AC power off, motor malfunction, system malfunction, standby |
| Additional Features | Real-time infused volume, automatic power switching,
Mute key, purge, bolus, system memory |
| Occlusion Sensitivity | 5 levels |
| Air-in-line Detection | Ultrasonic detector |
| Wireless Management | Optional |
| Power Supply, AC | 110/230 V (optional), 50-60 Hz, 20 VA |
| Battery | 9.6±1.6 V, rechargeable |
| Battery Life | 5 hours at 30 ml/h |
| Working Temperature | 10-40℃ |
| Relative Humidity | 30-75% |
| Atmospheric Pressure | 700-1060 hpa |
| Size | 174*126*215 mm |
| Weight | 2.5 kg |
| Safety Classification | Class Ⅰ, type CF |
Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Short Lead Time for Mri Iv Pump - ZNB-XD Infusion Pump – KellyMed , The product will supply to all over the world, such as: Cyprus, Anguilla, Sheffield, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Bernice from Kenya - 2017.12.09 14:01
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Susan from Mexico - 2018.11.06 10:04
Write your message here and send it to us
